Range : These laminates come in a Wide range of design & Colours.
Adhesive : These laminates are easy to apply with the standard laminating system, including most of the conventional adhesives normally used with plastic laminates such as many water based and solvent based. We do not recommend the use of heat activated adhesives.
Lamination : Proper substrates must be used and careful bonding procedures must be observed. Substrates should be of good quality plywood, high density particle board, or high quality fiber board. The face of the substrate must be smooth and free of grease, wax, dust, chips and other foreign matter.
Cutting & Machining : These laminates can be cut, routed and drilled, with most standard wood working tools or eguipments. All blades must be sharp. To remove any burrs that may occur in the cutting prosess, we recommend the use of smooth file to feather all corner edges.
Bending and Forming : These laminates can be bend and all radius bending should be handled in the same manner as all grades of non post forming decorative laminates. Kindly use V-Groove cutter to bend the sheets at 9W. For any difficulty please contact Black Cobra.
Maintenance : Any cleaning agent containing acids, alkalis or abrasive should not be bused to clean the laminate. Exposure to sunlight should be avoided.
Note : Black Cobra warrants that all its products are free from manufacturing defects and perfectly fit for use in normal conditions. In case of any claim, the liability the company's is however limited to the cost of the product only. These may be batch to batch colour variation. The sample swatches only represent the designs, colours and finish. They do not represent the actual thickness. KINDLY REMOVE THE PROTECTIVE FILM WITHIN 7 DAYS OF INSTALLATION .